FIXED TYPE
The NAFFCO Fixed type Compressed Air Foam Fire Suppression System uses compressed air to propel firefighting foam. Thousands of tight radius bubbles quickly cool and smother a fire by providing a thick Vapor-sealing blanket of foam that virtually eliminates re-ignition. The foam will adhere to horizontal and vertical surfaces. This system allows the operator to seal a fuel spill and flammable Vapors with foam thus reducing or eliminating a potential fire. The system will discharge the foam approximately 25-30 meters in a no wind condition allowing fire-fighting personnel without protective clothing to avoid thermal injuries. Trained personnel can accomplish all maintenance except hydrostatic pressure testing of the Air Cylinders, Premix Tank, and the Discharge Hose.
FEATURES
- Immediately isolate the surrounding Fire, protects transferring the fire to other places and prevent ignition of Fire further.
- Saving time and water for Civil Defense Personnel while they fight with Fire.
- Reducing damage to structures happens due to water.
- Allows Firefighters a better safety distance from Fire.
- Light hose lines for less stress for Fire-Fighters.
- Less environmental damage.
- Foamed areas signal a cooled surface.
- Less water runoff carrying pollutants.
- Reduced smoke emissions
- Less pressure needed due to lack of friction loss.
SPECIFICATION :
|
FIXED TYPE |
||
|
Extinguishing Agent |
CAFS Special Foam |
CAFS Special Foam |
|
Capacity (gallon) |
400 gallons |
500 Gallons |
|
Foam Selection |
Dry/Wet |
Dry/Wet |
|
Working Pressure for foam Cylinder |
8/10 bar |
8/10 bar |
|
Cylinder Material |
Stainless Steel, Grade 316 L |
Stainless Steel, Grade 316 L |
|
Test Pressure |
30 bars |
30 bars |
|
Filling Pressure of Air Cylinder |
150 bars |
150 bars |
|
Range Of Discharge |
22-25 m |
22-25 m |
|
Discharge Duration |
8 min. |
10min. |
|
Hose size & Length |
1” or 1½" x 30 m |
|
|
Operating temperature limits |
+5° C to +60° C |
+5° C to +60° C |
